Flipper One Starts at $399: What It Does and What Buyers Should Know

Flipper One is a $399 crowdfunding project for a portable Linux network tool, not a Flipper Zero replacement. Cellular costs extra, and RAM is not final.
Flipper One portable Linux networking device
Flipper One. Product image: Flipper Devices.

Flipper Devices has opened a Kickstarter campaign for Flipper One, a portable Linux computer built for working with networks. Rewards start at $399, with shipping targeted for July 2027. The campaign runs through December 17, 2026.

The name invites comparison with the popular Flipper Zero, but the two devices serve different jobs. One focuses on Wi-Fi, Ethernet and Linux software; it does not include Zero’s built-in NFC, low-frequency RFID, infrared or sub-GHz radio. There are also important purchase caveats: cellular requires a separate modem, shipping and taxes are extra, and the final amount of RAM has not been settled.

Flipper One vs. Flipper Zero

Flipper Zero is designed for interacting with a range of physical access and radio protocols. Flipper One is intended for IP networking and on-device computing, according to the campaign FAQ. It is a separate tool, not an all-in-one upgrade that incorporates the Zero’s radios.

Flipper describes potential uses including connecting multiple network links, running a hotspot, routing traffic through a VPN and examining devices and services on a network. Those functions will depend on the finished software and configuration. Network scanning should be limited to systems you own or are authorized to test.

What is included, and what costs extra?

The planned hardware includes Wi-Fi 6E, Bluetooth 5.2 and two gigabit Ethernet ports. A Rockchip RK3576 processor runs the Linux system, while a separate Raspberry Pi RP2350 microcontroller handles device controls. The current technical specifications also list 64GB of internal storage, HDMI output and USB-C video output.

The base device has an eSIM and a physical SIM slot, but neither makes it a cellular device on its own. To connect to a mobile network, users must install a compatible modem in its M.2 expansion slot. The company is offering 5G, LoRa and software-defined radio modules separately or in bundles; the SDR specifications are still being developed, according to BleepingComputer.

CNX Software reported campaign bundles at $439 with LoRa, $539 with SDR, $599 with 5G and $759 with all three. Check the live reward page before backing: availability and pricing can change, and those figures exclude shipping and applicable taxes.

RAM and open-source support are still moving targets

Some early specification lists described 8GB of RAM. Flipper’s current documentation instead marks both memory capacity and type as to be determined. The campaign FAQ warns that memory shortages could force changes, including a reduction in RAM. Anyone choosing the device for a memory-intensive workload should wait for a final specification.

Flipper is working with Collabora on support for the mainline Linux kernel, the upstream version maintained by the wider Linux community. That can make a device less dependent on a manufacturer’s custom kernel, but it is a development goal rather than a reason to assume every feature is complete. BleepingComputer reported that USB-C DisplayPort patches were under review and that work remained on removing closed-source boot components.

What to check before backing

The $399 starting reward is a pledge to a crowdfunding campaign, not an ordinary in-stock purchase. Flipper estimates shipping will begin in July 2027, but hardware development and manufacturing can slip. Kickstarter charges at the campaign’s end, and backers can change or cancel a pledge before then, according to the FAQ.

Shipping and taxes are collected later through the pledge manager. Flipper estimates shipping at $15 to $30 depending on location and order, and says it will pay import duties. Campaign deliveries are limited to the United States, Canada, the United Kingdom, Australia, the EU, Switzerland, Norway, Singapore and Hong Kong.

For someone who wants a pocket Linux networking platform and accepts an unfinished specification, the campaign offers a way to back the first production run. Anyone who needs Zero-style NFC or RFID tools, guaranteed RAM, or a device by a fixed date should evaluate those requirements separately and wait for the final hardware and independent testing.

Leave a Reply

Your email address will not be published. Required fields are marked *

Previous Post
Rows of server racks inside a modern data center, used to illustrate AI infrastructure capacity

Java4Shell: Which Java Servers Need Patching and What to Do Until They Are Fixed

Related Posts